0-6 Bar Pressure Gauge
Ø100mm Stainless Steel Case with Safety Glass
Dual scale dial bar/psi
+/-1% accuracy of full scale
Bottom Connection: 1/2" BSP acc. EN 837
Wetted parts Stainless Steel AISI 316
Adjustable pointer
Not filled but fillable with glycerin
With blow-out
Every pressure gauge has its own unique serial number
Ø 9" Chart Recorder
0-6 Bar
1 Revolution in 24 Hour
+/-1% accuracy of full scale
Connection: 1/2" BSP acc. EN 837
Wetted parts Stainless Steel AISI 316
Mechanical Spring Wound Clock
Including violet felt pen
A new recorder comes with 100 charts
Chart number: 1750-6-1
Thermoplastic High Pressure Hose with a maximum cold working pressure of 10,000psi / 700 bar.
Minimum burst pressure: 40,000 psi ( safety factor 4:1 )
Total length 5 meter.
Stainless Steel AISI 316 Fittings
1/2"BSP, 60 degrees swivel connection with o-ring
The o-ring enables you to hand tighten the connecting and be leek free till maximum working pressure.
Portable 500 bar high flow Air Driven Hydraulic Test Pump
with a weight of only 20 Kg.
Ratio 1:60
Maximum Output Pressure: 500 bar (7,200 psi)
Maximum Flow: 11 L/min (2.90 gpm)
Maximum Air Supply: 12 bar (170 psi)
Maximum Air Consumption: 3.1 Nm3/min (110 scfm)
Working Temperature: 5-60 degree Celcius (41-140 degree Fahrenheit)
The unit is a ready to use pump and includes the following components:
-0-600 bar (0-9,000 psi) hydraulic gauge for pressure indication.
-0-8 bar 1/2" Air Filter/Regulator and a 1/2" Lubricator.
-Ball Valve in the air supply to be use as a start/stop valve.
-Geka fluid supply connection with a 1/2" NPT strainer.
-1/2" NPT female high pressure outlet.
-1/2" Needle valve to be used as a Bleed Valve.
High Pressure connection: 1/2"NPT female
Fluid Supply connection: GEKA
Air Supply connection: 1/2" BSP female
Bleed Valve: 1/2" NPT female
Standard compatible with the following fluids:
-Plain water
-Water / glycal mix
-Petroleum based oils
The Vacuum pump can be used to fill Test Opjects that are hard to fill due to their design, the Vacuum Pump ables you to quickly fill the object to 95%.
Maximum Vacuum: 95% (-95 kPa)
Maximum Flow: 1650 L/min
Minimum Air Supply: 7 bar (100 psi)
MAximum Air Supply: 12 bar (170 psi)
Maximum Air Consumption: 810 NL/min
Working Temperature: 5-60 degree Celcius (41-140 degree Fahrenheit)
The unit is a ready to use and includes the following components:
-Ball Valve in the air supply to be use as a start/stop valve.
-Ø100mm. Vacuum Gauge for vacuum indication.
-0-8 bar 3/8" Air Filter/Regulator ( Preset at the most optimal setting ).
Maximum cold working pressure Relief Valve Body : 300 psi / 20,7 bar
Material Relief Valve Body : Stainless Steel AISI 316
Material Seal - Relief Valve : FKM